| 01. |
Auto detection-the starting point is pierce or edge cutting. Get the correct preheating time and the correct piercing motion to cut. |
| 02. |
Auto speed reducing-（100％-50％）when cutting circle or arc（plasma cutting）, Reduce speed to get little or no bevel. |
| 03. |
Two different cutting speeds-when cutting thicker plates, the beginning speed should be slower than the normal speed, in order to shorten the lead in distance. |
| 04. |
The CNC pulse setting can go up to xxxx.xxxx, 8 digital numbers in total. The CNC Tolerance is 0.5 to ten million. |
| 05. |
Kerf function. |
| 06. |
Pipe cutting function.（option） |
| 07. |
After kerf calculation, the end point of inner circle is protuberant or concave. |
| 08. |
Set radius or diameter input for kerf function. |
| 09. |
Gas cutting special function-pierce all starting points first（use improper nozzle）,then back to starting point to cut the shape（use proper nozzle）. |
| 10. |
Auto continue cutting between each plate,（CNC will automatically cut from one end of a plate to the next piercing point）, to reduce piercing times. |
| 11. |
Auto nesting for circles. |
| 12. |
Automatically divide circles to 2 or 3 pieces when too big to cut. |
| 13. |
Rort and cone development in CNC shape patterns. |
| 14. |
When cutting, can stop and move to anywhere to re-cut. |
| 15. |
Wireless remote control function-acc/ dec speed, stop, go on , forward, reverse, cut. |
| 16. |
Automatically acceleration/deceleration at corners. |
| 17. |
Automatically adjust graphic angles to fit plate position. |
| 18. |
I/O defined by user, if I/O relay breakdown-connect to another connection and redefine. |
| 19. |
Piercing motion can be defined by user. |
| 20. |
Include gas/plasma cutting condition, according to plate thickness.（adjustable） |
| 21. |
Set kerf with CAM code table. |
| 22. |
Shape patterns are expandable. |
| 23. |
One or multi torch cutting square plate patterns（for gas cutting, and for plasma cutting）. |
| 24. |
Many shape patterns for steel construction. |
| 25. |
Nesting on CNC. |
| 26. |
HPGL files converting function, it automatically nests cutting path-inside Shape cutting first, than outside shape cutting last. |
| 27. |
Tracing function and data saving in CNC. |
| 28. |
Can easily and rapidly edit shape on CNC （by line arc concept, not by G, M code）. |
| 29. |
Can convert end-plate-cover circle data to ellipse data for CNC cutting. |
| 30. |
Reverse acc/dec function（different with corner acc/dec）,to extend machine life. |
| 31. |
File can be selected by date or by name. |
| |
|
